Miele DA 2900, Operating And Installation Instructions

Page: 11 / 40

a
Edge extraction panels
DRP 2900 Glass (4 panels) or
DRP 2900 Stainless steel (4 panels)
b
Hob lighting
c
Controls
d
Grease filter
e
Indicator light
The indicator light will light up briefly
when a function is selected using the
remote control.
f
Hob lighting button
g
Buttons for selecting
the fan power level
On the remote control, these buttons
can also be used to switch the fan on
and off.
h
Button for the run-on option
The fan can be set to switch off
automatically after either 5 or
15 minutes.
i
These buttons have no allocated
function for this cooker hood
j
On/Off button for the fan
k
Operating hours button
The grease filter symbol
l
for the
operating hours button lights up when
the grease filters need to be cleaned.
The charcoal filter symbol
—
lights up
when the charcoal filters used in
recirculation mode need to be
replaced. For this to happen, the
operating hours counter needs to be
activated before the appliance is used
for the first time (only applies if the
cooker hood has been fitted with
DUU 2900 conversion kit for
recirculation).
This button is used to reset the
appropriate operating hours counter
each time the grease filters are cleaned
or the charcoal filters have been
replaced (see "Cleaning and care").
It can also be used to check and alter
the operating hours counter.
For information about using the
appliance, see "Operation".
Guide to the appliance
11