Miele DA 270-4 Operating And Installation Instructions Download

Page: 11 / 36

Cover

Tower

Control panel

Glass edge feature lighting

Hob lighting

Grease filters

Recirculation grille

Only for recirculation mode.

Charcoal filter

Special accessory for recirculation
mode

On/Off touch control for glass

edge feature lighting

Touch control for the hob lighting

This control switches the lighting on
and off, and is also a dimmer switch.

On/Off touch control for the fan

Touch controls to select fan power

level

Touch control for the run-on

option

The fan can be set to continue running,
and to switch off automatically after
either 5 or 15 minutes.

Touch control for the grease filter

The indicator lamp for the grease filters
lights up when the grease filters need
to be cleaned.

The touch control is used to reset the
operating hours counter every time the
grease filters are cleaned (see
"Cleaning and care").

It can also be used to check and alter
the operating hours counter.

Touch control for the charcoal

filter

(...U models only)

The indicator lamp for the charcoal filter
lights up when the charcoal filter used
in recirculation mode needs to be
replaced. For this to happen, the
operating hours counter needs to be
activated before the appliance is used
for the first time.

The touch control is used to reset the
operating hours counter every time the
charcoal filter is replaced (see
"Cleaning and care").

It can also be used to check and alter
the operating hours counter.

For information about using the
appliance, see "Operation".

Guide to the appliance

Summary of Contents for DA 270-4





































Search results

Summary of Contents for DA 270-4

Reviews:

Related manuals for DA 270-4

Brands by name

Popular brands

Miele DA 270-4, Operating And Installation Instructions

Search results

Summary of Contents for DA 270-4

Reviews:

Related manuals for DA 270-4

Brands by name

Popular brands