Miele DA 2510 Operating And Installation Instructions Download Page 6 | Manualshive

Page: 6 / 48

background image

Warning and Safety instructions

6

Technical safety



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.



A damaged appliance can be dangerous. Check it for visible signs

of damage. Do not use a damaged appliance.



The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.



Reliable and safe operation of this rangehood can only be assured

if it has been connected to the mains electricity supply.



The connection data (voltage and frequency) on the data plate of

the rangehood must match the mains electricity supply in order to
avoid the risk of damage to the rangehood.
Compare this before connecting the appliance to the mains
electricity. If in doubt, consult a qualified electrician.



Do not connect the appliance to the mains electricity supply by a

multi-socket unit or an extension lead. Extension leads are a fire
hazard and do not guarantee the required safety of the appliance.



EXT model rangehoods are connected to their external motor

using a special connection cable and plug connectors.
These appliances may only be combined with a Miele external
motor.

«
...
4
5
6
7
8
...
»

Summary of Contents for DA 2510

















































Reviews:

No comments

Related manuals for DA 2510

Brand: Parmco Pages: 12

Brand: Bush Pages: 33

Brand: Broan Pages: 8

Brand: NEFF Pages: 20

Brand: Kleenmaid Pages: 12

SY-3503C5-E15-C44-L191-600

Brand: Hanseatic Pages: 48

Brand: Windster Pages: 10

Design+ Down Draft Tavolo 120 Inox

Brand: FALMEC Pages: 88

Brand: Zephyr Pages: 30

Brand: Airvolution Pages: 17

Brand: Ancona Pages: 20

Brand: FALMEC Pages: 64

VENTILATION HOOD

Brand: AGA Pages: 14

Brand: Electrolux Pages: 12

Brand: Electrolux Pages: 16

Brand: Electrolux Pages: 16

Brand: Electrolux Pages: 20

Brand: Electrolux Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands