![background image](http://html.mh-extra.com/html/miele/da-230-3/da-230-3_operating-and-installation-instructions_237000027.webp)
^
Secure the ducting to the mounting
plate using a hose clip.
^
Insert the short edge of two spring
clips into their slots from below and
position so that the tab faces the cen-
ter of the mounting plate.
^
Pull the power cord through the
mounting plate.
^
Insert the four countersunk screws
M 6 x 20 into the recessed holes from
above.
Tape the screws from above to pre-
vent them from being pushed up-
wards when the nuts are tightened.
Installation
27