a
2 recirculation grilles
(for recirculation mode only)
b
2 protective sheets
for use when fitting the tower.
c
1 directional unit
(for recirculation mode only)
d
1 flexible aluminium hose
for con-
necting the directional unit to the ex-
haust socket on the motor unit.
e
2 hose clips
for securing the ex-
haust ducting.
f
1 non-return valve
for fitting into the
exhaust connection on the motor unit
(for extraction mode only).
g
Upper retaining plate B
for secur-
ing the extension piece.
h
Middle retaining plate C
for addi-
tional stability for the tower.
i
Lower retaining plate A
for secur-
ing the canopy and the motor unit.
12 large headed screws 5 x 40 mm
and
12, S 8 plugs
for securing the retaining
plates and the canopy.
2, M 6 locking nuts
for securing the
motor unit.
4 screws 3.9 x 7.5 mm
for securing the
tower and the extension piece.
Installation
17
