Miele CVA 7445 Operating And Installation Instructions Download

Page: 56 / 96

Cleaning and care

Cleaning the drip-tray cover



Remove the drip-tray cover as
follows: Apply pressure to the rear
edge so that the cover tips forward
and you can remove it easily.



The drip tray can be cleaned in the
dishwasher, or by hand using warm
water and a little liquid dish soap.



Dry the drip-tray cover.



Replace the drip-tray cover.

Water container

Clean the water container by hand
every day with warm water and a little
liquid dish soap. You can clean the
water container in the dishwasher once
a week.



Open the machine door.



Remove the water container.



Clean and rinse the water container
with clean water to remove any
detergent residues. Dry the outside of
the water container.



Clean and dry the surface that the
water container sits on.



Push the water container all the way
into the coffee machine until you feel
a resistance. Close the machine door.

Cleaning the main dispenser

Clean the main dispenser’s stainless-
steel cover by hand only using warm
water and a little liquid dish soap.

With the exception of the stainless-steel
cover, all parts of the main dispenser
should be cleaned in the dishwasher at
least

once a week

. This will remove

coffee deposits and milk residues
effectively.



Open the appliance door.



Pull the main dispenser’s stainless-
steel cover forward to remove it. Then
clean it.

Summary of Contents for CVA 7445

































































































Search results

Summary of Contents for CVA 7445

Reviews:

Related manuals for CVA 7445

Brands by name

Popular brands

Miele CVA 7445, Operating And Installation Instructions

Search results

Summary of Contents for CVA 7445

Reviews:

Related manuals for CVA 7445

Brands by name

Popular brands