Miele CVA 5065 Operating And Installation Manual Download Page 24

Page: 24 / 84

To make drinks with milk,

place the lid on the stainless steel
milk flask by twisting it anticlockwise
until it locks into place.

Open the machine door and hang the
milk flask in the machine as
illustrated, ensuring that the milk
pipework is correctly engaged.

Close the machine door.

Cappuccino, latte macchiato, hot
milk, milk froth

Place a suitable cup or glass under

both

jets.

For best results with latte
macchiato, the glass should
be placed beneath the jets

such that the espresso flows into the
centre of the milk froth.

Cappuccino

Touch the right arrow sensor until the
symbol for the drink you want is
highlighted and then touch the OK
sensor

once

Touch the OK sensor again to

stop

dispensing.

You can then specify the proportions
of coffee, milk froth and hot milk
required for the drink (see
"Programming the amount: setting
the portion sizes").

Making drinks

Summary of Contents for CVA 5065





















































































Search results

Summary of Contents for CVA 5065

Reviews:

Related manuals for CVA 5065

Brands by name

Popular brands

Miele CVA 5065, Operating And Installation Manual

Search results

Summary of Contents for CVA 5065

Reviews:

Related manuals for CVA 5065

Brands by name

Popular brands