Brew unit
The brew unit must be cleaned
once
a week by hand without using
washing-up liquid,
because the
moving parts are lubricated and the
rubber seals could become brittle in
a dishwasher.
^
Remove the water container, waste
container and the coffee chute cover.
^
Press the light coloured button under
the handle of the brew unit
a
and
whilst doing so turn the handle in the
direction of the arrow
b
.
^
Press the catch in front of the brew
unit
c
downwards, and pull the brew
unit carefully out of the machine.
If the brew unit is difficult to remove,
it is not correctly positioned (see
"Problem solving guide").
^
Clean the brew unit thoroughly under
hot running water
without
using
washing-up liquid.
Leave the handle in the same
position
, otherwise the brew unit will
be out of alignment and you will not
be able to push it back into the
coffee machine.
^
Wipe any remaining coffee off the two
filters. One filter is located in the
funnel
a
and the other to the left of
the funnel
b
.
^
Dry the funnel area
a
to prevent
ground coffee from sticking to it.
^
Clean the inside of the machine and
remove any coffee residues.
Use your vacuum cleaner to
remove dry ground coffee
residues.
^
Place the brew unit on the guide
runners and, keeping it straight, push
it into the machine.
Cleaning and care
56
Summary of Contents for CVA 5060
Page 78: ...78 ...
Page 79: ...79 ...
Page 80: ...Alteration rights reserved 2809 CVA 5065 M Nr 07 611 520 01 ...
