manualshive.com logo in svg

Miele CS 1327, Operating And Installation Instructions, Page: 24 / 40

Share
Download
Miele CS 1327 Operating And Installation Instructions Download Page 24

Installation

*INSTALLATION*

24

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION

Risk of damage caused by incorrect installation.

Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.

Damage from falling objects.

Take care not to damage the ProLine element when installing upper cabinets or
a ventilation hood above it.
Install the upper cabinets and ventilation hood before installing the ProLine ele-
ment.

 

Reaching over a hot appliance to access the cabinets can result in

burns. You can reduce the risk of burns by installing a ventilation
hood that extends at least 5" (12 cm) past the bottom of the cabi-
nets.

 

The countertop must be heat-resistant (up to 212°F / 100°C), so

that it does not become deformed or the veneer detached. The wall
strips must be heat-resistant as well.

 

The Tepan Yaki must not be installed right next to an electric bar-

becue (CS 1421). It is essential to maintain a minimum safety dis-
tance of 6" (150 mm) between the Tepan Yaki and the electric barbe-
cue.

 

​​The ProLine element must not be installed above refrigerators/

freezers, dishwashers, or washers/dryers.

 

When installing the ProLine element, make sure that the power

cord cannot come into contact with hot appliance parts.

 

When installing the ProLine element, make sure that the power

cord cannot come into contact with any moving kitchen parts (e.g., a
drawer), and cannot become trapped.

 

Observe carefully the safety clearances listed on the following

pages.

Summary of Contents for CS 1327









































Reviews:

No comments