Operation
25
Fire hazard!
Do not leave the cooktop unattended
whilst it is being used.
Switching on
Push in the control knob and turn it
anti-clockwise to the ignition
symbol
. The ignitor will "click" and
ignite the gas.
When a flame is visible, keep the
control knob pressed in for
5-10 seconds, and then let it go.
If the burner does not ignite or goes
out, turn the control knob back to "
".
Aerate the room or wait at least one
minute before trying again. Try
keeping the control knob pressed in
for a little longer the next time.
If the burner does not ignite the
second time, turn the control knob
back to "
" and see "Problem solving
guide".
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
Hold the control pressed in and light
the gas at the burner with a match.
Keep the control pressed in for a
further 5-10 seconds and then
release it.
