At the end of a program
^
Open the door slightly to check
whether the program has finished.
The indicator for the selected program
has gone out.
The program has not yet finished as
long as the program indicator is still
flashing. Close the door again so
that the program runs to the end.
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
You can now empty the dishwasher.
,
To avoid damage to counter
tops rom steam, open the door after
the end of the program either fully
(never ajar) or keep it closed until
you are removing all the dishes.
Turning off
At the end of a program:
^
Open the door.
^
Press the
V
button to turn the
dishwasher off.
The dishwasher continues to use
electricity until turned off with the
V
button.
To be safe, turn the water supply off if
the dishwasher is unattended for an
extended period of time, e.g. during
vacation.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
Use
34
Summary of Contents for Crystal G 5175 SCSF
Page 59: ...59 ...
