Miele CM5300, Operating Instructions Manual

Page: 20 / 80

Before using for the first time
20
Before using for the first time

Remove any protective foil and notes
from the machine.
 Insert the drip tray into the lower
panel.

Place the coffee machine on a flat
surface that is not sensitive to water
(see "Installation").
Clean the machine thoroughly before
filling it with water and coffee beans
(see "Cleaning and care").

Insert the plug of the coffee machine
into the socket (see "Electrical
connection").
 Remove the water container and fill it
with cold fresh water to the "max."
mark. Place it back in the machine
(see "Filling the water container").

Remove the bean container lid, fill the
bean container with roasted coffee
beans and replace the lid (see "Filling
the bean container").
Switching on for the first time

Touch the On/Off sensor

.
The welcome message
Miele -
Willkommen will appear in the display
briefly.

Use the arrow sensors

to
highlight the required language.
Touch
OK .

Then select the country if necessary
and touch
OK .
The setting is now saved.
The coffee machine is now set up for
use. It will heat up and rinse the
pipework. Water from the rinse process
will come out of the central spout.

Rinse the milk pipework (see "Rinsing
the milk pipework") before making
drinks with milk for the first time.
Please note that the full aroma of the
coffee and typical crema will not
develop fully until several coffees have
been made.
For the first coffee drinks, a larger
quantity of coffee beans is ground and
powder from the coffee grounds may
adhere to the cover of the drip tray.