Miele CM 5310 Series Operating Instructions Manual Download Page 42

Page: 42 / 76

Cleaning and care

- melamine eraser blocks

- sharp metal scrapers

- steel wool or stainless steel wire

scourers

Waste container, drip tray and
drip tray cover

Clean the drip tray and waste
container

every day

to avoid

unpleasant smells and mildew.

The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.

A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray

and

the

waste container.



Danger of burning.

If the rinsing process has just
finished, wait a while before
removing the drip tray from the
machine. The water used for rinsing
will continue to run out of the coffee
spouts for a while.



Pull the drip tray carefully out of the
machine. Take the lid



off.



Empty the drip tray

and

the waste

container.



Remove drip tray cover



and lower

panel





Clean all parts thoroughly.

Summary of Contents for CM 5310 Series













































































Search results

Summary of Contents for CM 5310 Series

Reviews:

Related manuals for CM 5310 Series

Brands by name

Popular brands

Miele CM 5310 Series, Operating Instructions Manual

Search results

Summary of Contents for CM 5310 Series

Reviews:

Related manuals for CM 5310 Series

Brands by name

Popular brands