Miele CM 5310 Series, Operating Instructions Manual

Page: 61 / 76

Problem solving guide
61
Problem Cause and remedy
Fill the bean container ap-
pears in the display
even though the bean
container has just been
filled.
This is not a fault.
 Confirm the message with OK .
Insufficient coffee beans are getting into the grinder.
Have you used a dark roast?
This type of coffee bean is often more oily. These oils
can cling to the inside of the coffee bean container
and hinder the flow of beans.

Make a coffee and observe whether the coffee
beans drop into the coffee bean container.

Clean the coffee bean container more often if you
are using a darker, more oily bean.
Try other types of coffee bean which are less oily.
The coffee machine
does not rinse itself
when turned on.
This is not a fault.
If the coffee machine is already at operating
temperature, rinsing will not take place.
Coffee dispensing is re-
peatedly interrupted
and the message
Fill the
bean container appears in
the display.
This is not a fault.
The brew unit has not detected the ground coffee.
The coffee may be too finely ground or there may not
be enough of it. Usually this is because the grinder is
set too fine and the amount set is insufficient.
 Confirm the message with OK .
If the coffee is too strong for you or tastes bitter, try a
different type of coffee beans.
If the display appears with all types of coffee:

Set the grinder to a coarser setting (see “Grinder
setting”).
 Check the amounts of coffee set for all coffee
drinks (see “Amount of coffee”). Select a larger
amount of coffee if necessary.
Don't forget to check any drinks changed in
“Profiles”.
If the message only appears when dispensing certain
drinks:
 Check the amount of coffee set for this drink (see
“Amount of coffee”). Select a larger amount of
coffee.
 You may also need to set a coarser grinder setting.