manualshive.com logo in svg

Miele Built-in coffee machine, Operating And Installation Instructions, Page: 56 / 84

Share
Download
Miele Built-in coffee machine Operating And Installation Instructions Download Page 56

Drip tray

Clean the drip tray

every day

to

avoid unpleasant smells and
mildew.

A prompt will appear in the display
when the drip tray is full and needs to
be emptied. Empty the drip tray at the
latest when this prompt appears.

Danger of scalding!
If the rinsing process has just
finished, wait a while before
removing the drip tray as the water
used for rinsing will run out of the
coffee spouts.

^

Open the machine door and carefully
remove the drip tray from the
machine.

The grid in the drip tray prevents the
water from spilling out of the tray
when it is being carried.

^

Clean the drip tray and the grid with
hot water, a little washing-up liquid,
and a soft cloth, or in the dishwasher,
and dry with a cloth.

Make sure that the metal contact
discs on the drip tray are cleaned
and dried properly. The discs will not
be able to detect that the drip tray is
full if they are dirty or damp.

^

Clean the area underneath the drip
tray.

^

Push the drip tray back into the
coffee machine.

Make sure that the drip tray is
pushed right into the coffee machine
as far as it will go.

Drip tray cover

^

Remove the drip tray cover.

^

The drip tray cover can be cleaned in
the dishwasher, or by hand using
warm water, a little washing-up liquid,
and a soft cloth.

^

Dry the drip tray thoroughly.

^

Refit the cover in the drip tray. Make
sure the drip tray cover sits flush at
the front.

Cleaning and care

56

Summary of Contents for Built-in coffee machine





















































































Reviews:

No comments