![background image](http://html.mh-extra.com/html/miele/awg-102/awg-102_operating-and-installation-manual_235331004.webp)
This appliance conforms to current
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
Before installation and before using
for the first time, read the operating
instructions carefully. They contain
important information on safety,
installation, use and maintenance of
the appliance. This way you will
avoid the risk of accidents and
damage to the appliance.
Keep these operating instructions in
a safe place and ensure that all
users are familiar with the contents.
Pass them on to any future owner of
the appliance.
Correct usage
The appliance is intended for
domestic use only. The
manufacturer cannot be held liable for
damage caused by incorrect or
improper use of the appliance.
Technical safety
Before connecting the appliance to
the mains supply, make sure that
the voltage and frequency details given
on the data plate correspond with the
on-site electricity supply, otherwise the
appliance could get damaged. If in any
doubt, consult a qualified electrician.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system which complies with local and
national safety regulations. It is most
important that this basic safety
requirement is present and regularly
tested and where there is any doubt the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to
ensure safety.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
Warning and Safety instructions
4