Miele A 306/1, Operating Instructions Manual, Page: 34 / 116

en - Areas of application
34
Measuring cylin-
der, tall
The openings of the measuring cylinders must rest completely on the
injector nozzle supports. The cylinders must not touch the module or
the injector nozzles in order to prevent damage such as glass break-
age during reprocessing. Move the holder frames as required so that
the openings rest fully on the supports.
Measuring cylin-
der, short
The measuring cylinders must rest on the plastic supports of the in-
jector nozzles. However, they must not be allowed to touch the
nozzles themselves. If the measuring cylinders rest on the nozzles
during reprocessing, damage such as glass breakage may occur.
Move the holder frames or the plastic supports on the nozzles as re-
quired in order to adjust the positions of the measuring cylinders.