Miele 51514001AUS Operating And Installation Instructions Download Page 24

Page: 24 / 64

Preparing for use

Switching on the washing machine



Press the



button.

Selecting a programme



11:02







Programmes

Favourites

Supervisor

Help

There are different ways to select a programme.

You can select a programme from the

Programmes

menu.



Touch the

Programmes

sensor.



11:02

White items

Minimum iron

Express

Coloured
items

Delicates

Woollens

Programmes



Scroll to the right of the display until the programme you want
appears.



Touch the sensor for that programme.

The display will change to the standard menu for that wash
programme.

Alternatively, you can select a programme from the

Favourites

menu.

The programmes under Favourites can be changed by the operator
(see "Supervisor level - Favourite programmes").



Touch the

Favourites

sensor.



11:02









Coloured
items

Woollens

Delicates

Minimum iron

Favourites



Scroll to the right of the display until the programme you want
appears.



Touch the sensor for that programme.

The display will change to the standard menu for that wash
programme.

Summary of Contents for 51514001AUS

































































Search results

Summary of Contents for 51514001AUS

Reviews:

Related manuals for 51514001AUS

Brands by name

Popular brands

Miele 51514001AUS, Operating And Installation Instructions

Search results

Summary of Contents for 51514001AUS

Reviews:

Related manuals for 51514001AUS

Brands by name

Popular brands