Miele 4002516366881 Operating Instructions Manual Download Page 12

Page: 12 / 112

IMPORTANT SAFETY INSTRUCTIONS



The built-in Waterproof system offers reliable protection against

water damage if the following conditions are met:

- Installation has been carried out correctly.

- The dishwasher is properly maintained and parts are replaced in

case of noticeable damage.

- The shut-off valves have been turned off during longer absences

(for example, vacation).

The Waterproof system will work even when the dishwasher is
switched off. However, the dishwasher must remain connected to
the electricity supply.



The manufacturer’s warranty will be invalidated if the machine is

not repaired by a Miele-authorized service technician.

Summary of Contents for 4002516366881

















































































































Search results

Summary of Contents for 4002516366881

Reviews:

Related manuals for 4002516366881

Brands by name

Popular brands

Miele 4002516366881, Operating Instructions Manual

Search results

Summary of Contents for 4002516366881

Reviews:

Related manuals for 4002516366881

Brands by name

Popular brands