en - Installing in a side-by-side combination
24
Installation
The freezer or the refrigerator with a
freezer compartment must be in-
stalled to the left of the refrigerator
(when viewed from the front). The
foamed-in side wall heating located in
freezer or refrigerator with freezer
compartment is designed to prevent
the build-up of condensation
between the two appliances.
Place the two appliances as close as
possible to their final position so that
they can be aligned for any uneven-
ness in the floor. The back of the ap-
pliances still need to be kept access-
ible to complete the installation.
Before starting, peel off any protect-
ive foil from the appliance casing.
Notes on moving side-by-side appli-
ances:
Push the combination alternately from
the left- and right-hand corners.
Whilst doing so grasp hold of the out-
side front corners. Do not use your
knees to push against the sides or
the appliance doors!
Once the side-by-side combination is
right in front of the niche, push it
carefully into position.
If you need to pull the combination
back out of the niche, hold it by the
lower third and pull it straight out.