Frequently Asked Questions
Problem
Possible cause and solution
You cannot open the
door with the
Door
sen-
sor button.
You have selected the
Display
|
QuickTouch
|
Off
setting. The
Door
sensor button does not respond
when the oven is switched off.
As soon as the oven is switched on, the sensor
buttons will respond. If you want the sensor
buttons to respond even when the oven is
switched off, select the
Display
|
QuickTouch
|
On
setting.
The oven is not connected to the domestic electrical
supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Service.
If you need to open the door, for instance because
there is still food inside the oven, use the opener
supplied to pry the door open. To do this, push the
opener at an angle into the gap on the outside
edge of the door at the top between the control
panel and the door. You can also pull the door
open by grasping it at the sides with both hands
and pulling carefully until it opens.
The Self Clean program has started.
Danger of injury caused by hot surfaces.
During the Self Clean program, the oven door will
remain locked until the temperature inside the
oven drops to below 535°F (280°C).
Do not attempt to pry open the door with the
opener as described above!
Wait until the oven has cooled down. The door will
unlock itself automatically as soon as the
temperature inside the oven has dropped below
535°F (280°C).
97