manualshive.com logo in svg

Miele 11 631 610, Operating Instructions Manual

Share
Download
Miele 11 631 610 Operating Instructions Manual Download Page 18

Operating the tumble dryer

18

Setting numerical values

You can set numerical values in some
menus.

OK

12    00

11       59

10       58

13       01

14       02

Clock display

Enter the numbers by swiping upward
or downward. Place your finger on the
number that you want to change and
move your finger in the direction you
want. Use the 

OK

 sensor button to ac-

cept the set numerical value.

Tip: 

Briefly touching the orange num-

bers between the two lines will bring up
the numerical keypad. Once a valid
number has been entered, the 

OK

 sen-

sor button will be highlighted in green.

Pull-down menu

The pull-down menu can be used to
display information, e.g., about a drying
program.

11:02

2:35

Overview

Normal

h

 Timer

 Save

Drying level

Normal

Extras

not selected





Touch the top edge of the screen in the
middle and drag down with your finger.

Help display

With some menus, 

Help

 appears along

the bottom line of the display.

Touch the 

Help

 sensor button to dis-

play the text.

Touch the 

Close

 sensor button to re-

turn to the previous screen.

Exiting a menu

Tap the 

 sensor button to return to

the previous screen.

Entries made before this which have not
been confirmed with 

OK

 will not be

saved.

Summary of Contents for 11 631 610





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands