Before using the appliance for
the first time, you require:
– approx. 2 litres of water,
– approx. 2 kg dishwasher salt*,
– domestic dishwasher detergent*,
– rinse aid* formulated for domestic
dishwashers.
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
* See "Optional accessories"
Filling the salt reservoir
If the water in your area is very soft
and constantly
lower than
0.7 mmol/l (4 °d - German scale)
,
you do not need to add dishwasher
salt. The water softener must,
however, still be programmed to
correspond to the water hardness
level in your area.
Important. Before filling the salt
reservoir with dishwasher salt for the
first time
, you must fill it with
approx. 2 litres of water to enable
the salt to dissolve. Once the
dishwasher has been used, there is
always sufficient water in the
reservoir.
,
Do not fill the salt reservoir with
powder or liquid dishwasher
detergent. This will damage the
water softener. Make sure you have
picked up the correct packet of
dishwasher salt before filling the salt
reservoir!
,
Only use special coarse grained
dishwasher salt for reactivation, as
other salts may contain insoluble
additives which can impair the
functioning of the water softener.
Before using for the first time
23
