Prepare the appliances
^
Place the appliances next to each
other in the intended configuration.
Remove the mounting frames located
on the top and inside (handle side) of
each appliance.
^
On each appliance, remove the
screws
a
from the upper mounting
frame
b
and pull the frame up and
off.
^
Loosen the screws
c
a few turns on
the side mounting frame
d
of each
appliance.
^
Slide each side mounting frame
d
slightly upward and then outward to
unhinge.
^
Screw the screws
c
all the way in
again or remove them completely.
^
Take the hinge halves
e
from the
side-by-side kit and screw them to
both appliances.
^
Screw the side plates
f
to both
appliances. Check the position of
both appliances!
en
5
