Reprogramming
21
Example of reprogramming
To alter the
buzzer at the end
of a programme
Make sure you are in programming level to select the programmable
function P2.
Turn the rotary programme selector one click clockwise.
The
"low temperature" LED will flash briefly twice.
will flash alternately with
in the segment display.
Programmable option
Off
and
On
.
Press the "START/STOP" button to change the option to
.
The buzzer at the end of the programme is now deactivated. The
buzzer indicating a fault remains active.
Switch the tumble dryer off with the
button.
The change is now saved to memory.
Reprogramming
for the visually
impaired
Go to programming level. The programmable options need to be
changed for
P 3 Memory function
and
P 4 Acoustic keypad tones
(see also "Programmable functions" chart).
Turn the "Programme selector" two clicks clockwise to
P 3 Memory
function
.
The
"Low temperature" LED will flash rapidly 3 times.
will flash alternately with
in the segment display.
Programmable option
Off
and
On
.
Press the "START/STOP" button to change the option to
.
The Memory function is no longer active i.e. after the end of a pro-
gramme the machine will always run the pre-set "Extra dry" pro-
gramme the next time it is used.
Turn the "Programme selector" three clicks clockwise to
P 4
Acoustic keypad tones
.
The
"Low temperature" LED will flash rapidly 4 times.
will flash alternately with
in the segment display.
Programmable option
Off
and
On
.
Press the "START/STOP" button to change the option to
.
"Acoustic keypad tones" are now switched on.
Switch the tumble dryer off with the
button.
The change is now saved to memory.
