Miele professional PG 8057 TD, Quick Start Manual, Page: 31 / 140

en - Before using for the first time
31
Water connections
The display will then change to the screen
for setting the water connections.
This setting can be switched off if the com-
mercial dishwasher cannot be connected to
all available water connections.
If individual water connections are
switched off, they can only be reactivated
by the Miele Customer Service Depart-
ment.
If a DI water connection is not available
and you wish to use the Beer glasses pro-
gramme (depending on the model), the
controls on the dishwasher have to be re-
programmed by the Miele Customer Ser-
vice Department to enable the final rinse
to be carried out with cold water.
Plumbing connections
Accept
Cold water
,
;
9

Use the

and

arrow buttons to select
the water connections which are not con-
nected and confirm your choice using the
OK button.
The tick  will be removed from the box 
and the water connection will then be
switched off.

Select
Accept
to save your selection and
confirm using the OK button.
Commissioning completed
Commissioning is successfully completed
and the following message will appear in the
display.

OK
Set up successful

Press the OK button.
The commercial dishwasher is now ready
for use.
M
PROFESSIONAL
PG 80XX
The status display appears for 3 seconds.
Then the first direct-access pushbutton pro-
gramme will appear in the display.