ASSEMBLY INSTRUCTIONS
Place the Carrier Top on a flat surface.
Attach the Strap Hooks in the front and
back, attach one Security Hinge, and
attach the Handle.
Note: The Handle comes pre-attached
on the 22” and 24” carriers.
Attach the remaining Security Hinge to the
Carrier Bottom.
When the Security Hinges are in the
“open” position, the door can be opened
and will remain secure when closed. In the
“closed” position, the Security Hinges
provide additional security by adding
length to the space that the door prongs
must clear to open.
1.
2.
Strap Hook
Location
Handle
Security
Hinge
Security
Hinge
Closed Position
Open Position
Strap Hook
Location
Place the Carrier Bottom on a flat surface and
attach the Assembly Buckles. The Yellow
Hinges will snap into place on the spaces
provided on the Carrier Bottom; keep the
Assembly Buckle and Yellow Buckle Hinge in
a “V” formation while attaching for easiest
application.
Place the Carrier Top on the Carrier Bottom.
Before locking the Buckles, attach the Door by
placing the bottom door prong into the hole on
the left side of the Carrier Bottom. Lift up on
the Carrier Top to insert the top door prong into
the Carrier Top. Lower the Carrier Top so it rests
on the Carrier Bottom and secure them together
by locking the Assembly Buckles.
NOTE: The assembled carrier has multiple
tie-down locations in the corners for use with
plastic ties. This is recommended for air travel.
Always check with your air carrier prior to
booking to ensure you are following your
airline’s specific travel requirements.
To operate the Door, squeeze the orange tabs to
disengage the spring-loaded prongs, then
swing the door open.
3.
4.
5.
“V” Formation
2
3
