Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorestation.com
0003526
Page 13
REV A 4/12/06
CANOPY COVER (VINYL)
MAINTENANCE
This canopy contains a mildew retar-
dant. Please follow these recommen-
dations to insure that this agent is not
destroyed and that the vinyl will not be
damaged.
1. Ordinary oil and dirt can be
removed with soapy water such as
laundry detergent. Apply with a mop,
sponge, brush or cloth followed by
a clear-water rinse. Stubborn spots
can be removed by using rubbing
(Isopropyl) alcohol in a well-venti-
lated area, away from open flames.
DO NOT USE gasoline, kerosene,
methyl ethyl Keytone (MEK) or
other solvents or bleaches.
2. Remove canopy when hoist is in
storage. Make sure canopy is dry
before folding and store in a warm,
dry location.
WARRANTY
Refer to your
ShoreStation
Owner’s
Packet for warranty information.
CANOPY END HOOD ADJUSTMENT
Your new canopy frame has adjustable
end hood brackets which allow the
frame to be adjusted a total of 1-1/2”
shorter or 1-1/2” longer from its normal
shipped position. This allows you to ad-
just your frame to fit the cover for length
should it need adjusting. The following
instructions will assist you in adjusting
the frame length.
1. Loosen the nuts on the adjust-
ing bolts located in the end of
the sideframe tube weldments.
Doing so will shorten the overall
length of the frame.
2. The frame can be lengthened to fit
the cover by tightening the nuts on
the bolts in the side frame tube
stop weldments just loosened in
Step 1.
Turn clockwise. As the nut is
threaded onto the bolt it will pull
the end hood out of the side
frame thus increasing the length
of the canopy framework.
Continue to lengthen the
frame until it is the right
length to fit the cover.
3. Once the proper length for the
frame has been achieved, stop
turning the nut.
Adjustment is complete.
If the bungee feel like they need to be
tighter, they can be tightened by simply
wrapping an additional wrap of the bun-
gee cord around one of the canopy cord
spool hooks. It may be tightened more
by repeating this process on as many
canopy cord spool hooks as needed.
