Lay crate on flat surface so Plastic Pan is on bottom
and wires are facing up, then unlatch Locking
Device located on side of crate.
Grab any wire on the top panel and turn it like the
page of a book. Then grab top and side panel and
pull upwards. This will form shape of crate.
Make sure the bottoms of the two Side Panels rest
inside the Bottom Panel (as illustrated), and that
one edge of the Top Panel is “inside” the Side Panel
and “outside” of the other Side Panel.
Reach in the home and pull the Door Panel forward
until it fits into the clips on the ends of the Side
Panel. Repeat with End Panel.
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
IMPORTANT INFORMATION
Assembly Instructions for Model Numbers
418, 422, 424, 430, 436, 442, 448
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case
of return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
Please save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If
you discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday
9 a.m. to 4 p.m. EST) or email customer service at [email protected].
Parts Include:
Fold & Carry Pet Home, Plastic Pan, Divider Panel, and Plastic Carrying Handle(s)
1.
2.
3.
4.
ASSEMBLY INSTRUCTIONS
418DD, 422DD, 424DD, 430DD, 436DD, 442DD, 448DD
Side
Panels
Bottom Panel
Top Panel
Locking
Device
1
2
3
4
