Door Panel (1) -
Large rectangular panel
with (2) doors and latch knobs. When
assembled, the name plate should be in the
upper left corner.
Back Panel (1) -
Large rectangular panel
without doors.
Side Panel (2) -
Smaller rectangular panel.
When oriented correctly, the middle hole on
the side is slightly above the middle horizontal
wire. (Details in Assembly Instructions)
Assembly Instructions for Model 143 Add On
Parts Identification
IMPORTANT INFORMATION!
1. If you discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560.
2. Please save sales receipt as proof of purchase for warranty purposes.
3. You will need a phillips head screwdriver for assembly.
MIDWEST Homes For Pets
P.O. Box 1031
Muncie, Indiana 47308
800-428-8560
www.midwesthomes4pets.com
A
B
C
C
A
B
Middle Panel Grid -
Large rectangular mesh
panel finished in black e-coat. There is a cut-
out opening in corner.
D
E
D
Middle Pan -
Plastic tray with a cut-out
that fits in the middle of the cage.
E
F
G
F
G
Note: Illustrations not shown to scale
1
Bolts (8) -
Phillips head bolts to connect parts together.
I
Washers (8) -
Used with the bolts.
J
Plastic Caps (4) -
Place in the openings in the top of the cage after assembly.
K
Shelf (1) -
Wire structure with plastic sheet insert.
Connector (4) -
Joins the cage and stand together.
H
H
Ladder (2) -
Wire ramp for access from one level to the other.
(Note: There is a slight bend in the middle. This is intentional.)
