Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return or exchange, failure to return
product in similar condition as received could result in limited reimbursement. Please save sales receipt as proof of purchase for warranty purposes. Check to
ensure you have all the parts below. If you discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday
9 a.m. to 4 p.m. EST) or at [email protected].
The Critterville Arcade comes with several spare parts. While they might not be used during the initial assembly, you should keep these parts in case they are
needed in the future. Your Critterville Arcade is also expandable, with the option to attach tubes and other accessories (sold separately) or to connect the Arcade
to another hamster home.
PLEASE KEEP THE WHITE AND BLUE RINGS FOR FUTURE USE.
Their application and usage is explained in detail in Step 12.
PARTS IDENTIFICATION
IMPORTANT INFORMATION
A - Vertical Playspace
B - Wire Top
C - Playspace Cover
D - Plastic Bottom
E - Food Bowl
F - Circular Cubby - 2 pieces
G - White Rings - 2
H - Blue Rings - 6
I - Platforms - 2
J - Ramps - 3
K - Tube - 8 pieces
L - Exercise Wheel - 3 pieces
M - Plastic Pegs and Nuts - 5 each
N - Locking Hinges - 3
O - Tube Adapter with Cap & Blue Ring
P - Clips - 2
Q - Water Bottle - 3 pieces
R - Clear Cap
A
B
D
L
C
H
E
J
K
Assembly Instructions for Model Number
100-AR
F
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
I
1
G
M
N
O
P
Q
R
Assembly Instructions and Videos can be viewed at
midwesthomes4pets.com.
ASSEMBLY INSTRUCTIONS
2.
Secure the Vertical Playspace with a Plastic Peg and Nut. The first Peg should be go through the hole in the Playspace, then between the wires, in the sev-
enth wire space from the back corner. From the wire side, attach the Nut to the Peg until it clicks. Use three more Plastic Pegs and Nuts to finish securing
the Playspace to the Wire Top.
1.
Place the Vertical Playspace on the Wire Top, aligning the holes as shown.
