Midway Gauntlet Dark Legacy, Operation Manual

Page: 58 / 61

Gauntlet: Dark Legacy 59
Chapter 6 Troubleshooting
G a m e c a n n o t b e p l a y e d
Symptom Problem Suggested Solution
• Game does not accept
currency or tokens.
• Game does not start.
• Audio present
• Video present
Blocked coin path. 1. Unlock and open cash door. Empty cash box and inspect
revenue for counterfeit currency.
2. Remove items that block path from coin mechanism.
3. Ensure proper mounting of each mechanism. Clear cur-
rency path. Reinstall and latch mechanism.
Poor leveling Verify mechanisms are level when doors are closed. Repair
or replace bent or damaged coin door. Adjust cabinet leg
levelers to keep mechanisms vertical.
Incorrect software
setting 1. Enter Menu System by pressing TEST MODE switch.
From SELF TEST menu, choose COIN OPTIONS. Con-
firm pricing and setup of each mechanism.
2. Choose CONTROL TESTS to check operation of each
coin or bill mechanism.
• Game accepts currency
or tokens.
• Game does not start.
• Audio present
• Video present.
1. Ensure proper mounting of each mechanism. Verify each
release latch is closed and locked. Test acceptance and
rejection functions with known good and bad coins.
2. Ensure no loose parts or wires are caught in hinges,
latches, or switch contacts.
3. Inspect illumination of external coin door indicators (i.e.,
pricing, flashing arrows). Check wiring continuity of
connectors and cables from CPU Board to coin mechs.
4. Enter Menu System by pressing TEST MODE switch.
From SELF TEST menu, choose COIN OPTIONS. Use
tests to confirm pricing and setup of each mechanism.
5. Check for continuity in each suspect switch connection
(Common to Normally Open or Common to Normally
Closed) Replace faulty switches (bent levers, broken
actuators, etc.)
6. Place coin mechs in known good unit to verify operation.
• Bill validator fails after
field installation.
• Coin mechanisms oper-
ate properly.
1. Enter Menu System by pressing TEST MODE switch.
From SELF TEST menu, choose COIN OPTIONS. Con-
firm pricing and setup of each mechanism. Check valida-
tor switch settings against manufacturer’s instructions.
2. Check illumination of external coin door indicators (i.e.,
pricing, flashing arrows). Free parts or wires caught in
hinges, latches, or switch contacts. Verify seating of har-
ness connectors. Check validator cable continuity.
3. Place bill validator in known good unit to verify opera-
tion.
• Coin indicators do not
light.
• Game operates normally.
Bad fuse. Check coin light fuse and wiring harness. Replace bad fuse.