MIDWAY GAMES 40260, Operator'S Manual

Page: 20 / 64

Dip Switch Test
The D I P Switch Test allows the operator to check the location of the two 8-position D I P switches on the
CPU Board . The operator can also change the setting of each position of each DIP Switch d u ring this
mode.
To enter the test, press the Volu me Up or Volu me Down Button to h ig h l ight the DIP Switch Test, then
press the Test Button. The screen displays a layout of their cu rrent setti ngs.
To change a D I P Switch setti ng, move the switch to the desired setti n g , then check the screen to verify
that the switch now shows the new settin g .
Press t h e Service Credit Button t o exit t h e D I P Switch Test.
DIP Switch 2 Settings Table (U97)
SW1 SW2
Test
OFF
Normal ON
Not Used O F F
ON
Stand Up
Sit Down
Total N u m ber of Games Linked
2 Linked Games
2 Linked Games
3 Linked Games
4 Linked Games
Link Enable
Link Disable
Game Linking l . D. N u m ber
Master (# 1 )
Slave (#2)
Slave (#3)
Slave (#4)
LINKING NOTES:
1 ) To set u p linking , U97 switch #6 must be O N .
SW3 SW4 SW5
O F F
O N
O N O N
O N O F F
O F F O N
O F F O F F
SWG SW7 SW8
O N
O F F
O N O N
O N O F F
O F F O N
O F F O F F
2 ) For a 2-way l i n k, the game on the left i s the master (#1 ), the game o n the rig ht i s the slave (#2) .
U97, switch # 4 and #5 must be set for two linked games.
3) For a 3-way l i n k, the game on the left is the master (#1 ) , the game i n the center is a slave (#2) and the
game on the right is a slave (#3). U97, switch #4 and #5 must be set for th ree l i n ked games.
4) For a 4-way l i n k, the game on the left is the master (# 1 ), the game on the left center is a slave (#2 ),
the game on the rig ht center is a slave (#3), the game on the rig ht is a slave (#4). U97, switch #4 and
#5 must be set for fou r l i n ked games.
1-12