MidNite MN3024DIY User Manual Download Page 39

39 of 39

10-527-1 MN3024DIY REV A

MN3024DIY
User Manual

MIDNITE SOLAR INC. LIMITED WARRANTY

MidNite Solar DIY inverters, DIY sheet metal enclosures, DIY breaker boxes and DIY accessories

MidNite Solar Inc. warrants to the original customer that its products shall be free from defects in materials and

workmanship. This warranty will be valid for a period of ONE (1) year for all DIY series inverters, DIY sheet metal

enclosures, DIY breaker boxes and DIY accessories.

At its option, MidNite Solar will repair or replace at no charge any MidNite product that proves to be defective

within such warranty period. This warranty shall not apply if the MidNite Solar product has been damaged by

unreasonable use, accident, negligence, service or modification by anyone other than MidNite Solar, or by

any other causes unrelated to materials and workmanship. The original consumer purchaser must retain

original purchase receipt for proof of purchase as a condition precedent to warranty coverage. To receive in-

warranty service, the defective product must be received no later than two (2) weeks after the end of the

warranty period. The product must be accompanied by proof of purchase and Return Authorization (RA)

number issue d by MidNite Solar.

For an RMA number contact MidNite Solar Inc., (360) 403-7207. Purchasers must prepay all delivery costs or

shipping charges to return any defective MidNite Solar product under this warranty policy. Except for the

warranty that the products are made in accordance with, the specifications therefore supplied or agreed to by

customer:

MIDNITE SOLAR MAKES NO WARRANTY EXPRESSED OR IMPLIED, AND ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  WHICH EXCEEDS THE FOREGOING

WARRANTY IS HEREBY DISCLAIMED BY MIDNITE SOLAR AND EXCLUDED FROM ANY AGREEMENT MADE

BY ACCEPTANCE OF ANY ORDER PURSUANT TO THIS QUOTATION. MIDNITE SOLAR WILL NOT BE

LIABLE FO R ANY CONSEQUENTIAL DAMAGES, LOSS OR EXPENSE ARISING IN CONNECTION WITH THE

USE OF OR THE INABILITY TO USE ITS GOODS FOR ANY PURPOSE WHATSOEVER. MIDNITE SOLAR'S

MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE CONTRACT PRICE FOR THE GOODS

CLAIMED TO BE DEFECTIVE OR UNSUITABLE.

Products will be considered accepted by customer unless written notice to the contrary is

given to MidNite Solar within ten (10) days of such delivery to customer. MIDNITE SOLAR is not responsible for

loss or damage to products owned by customer and located on MIDNITE SOLAR'S premises caused by fire or

other casualties beyond MIDNITE SOLAR's control. This warranty is in lieu of all other warranties expressed or

implied.

MIDNITE SOLAR INC. Email:

 [email protected]

PH: 360-403-7207 FAX: 360-691-6862

Summary of Contents for MN3024DIY








































Reviews: