10-264-1 REV-C
2
Step 2.1:
Attach Whizbang Jr. to Midnite Classic.
A.
Strip approximately 3/16” from the end of the 22AWG purple
Whizbang Jr. wire. Twist the strands together to reduce fraying.
B.
Feed wire through preferred conduit opening.
C.
Secure wire to
Classic AUX2+ input
, see Fig. 3 below.
D.
Figure 3 – Whizbang Jr., connection to Classic.
Figure 2 – Whizbang Jr. and
3
rd
party connections
Figure 1 – Whizbang Jr. Only
Included Hardware:
2x
6-218-1
1/8” long, 1/4" O.D., .171” I.D. Alum. Spacer
2x
6-210-1
1/4" long, 1/4" O.D., .171” I.D. Alum. Spacer
2x
6-239-1
3/4" long #8-32 Phillips, Stainless.
Not-Included Hardware:
1x
9-004-1
Deltec MKB Series, 500A, 50mV Shunt.
2x
None.
#8 Ring Terminals.
NOTE: WHIZBANG JR. CAN BE MOUNTED ON SHUNT
BACKWARDS, BUT MEASURED CURRENTS WILL BE OF
INCORRECT POLARITY!
