Midnite Kid Basic Solar Charging Kit
11 |
P a g e 1 0 - 4 0 4 - 1 R E V -
Mounting the ground bus bar
At this time, you can install the non-insulated grounding bus bar in the mounting hole right next to where the
battery wires will come into. You will use the fastening hardware for this.
Note that the Green wire from the GFP -63 will go right into it. This also where the ground wire goes that is
connected to a ground rod or other approved grounding system.
Battery breaker wiring
The
#10
AWG positive and negative wires from your
battery
should come into the bottom of the BigBaby via
the 2nd set of holes in the strain relief. The positive wire connects to the bottom (the ++ end) of the
MNEPV30 breaker
. The negative wire connects to the negative bus bar.
