MNBE-B, D, D3R, E Instructions
(continued)
Rev: A Page 7 of 10
Snug the screws up to the hinge, but do not over tighten.
Step 6:
Attach the left door using #6 flat head sheet metal screws The right door uses the same screws.
Left door has a lip as shown.
Step 7:
Assemble the lock in the double D hole as shown below.
Note: It may require a bit of adjustment on the cam in order to align with slot in the bottom of
shelf.
Lock Installed
Lock shown latched
Parts of lock assembly
Your Battery enclosure is now fully assembled.
Before placing batteries on shelves, make sure the enclosure is in its final location. It will be too
heavy to move once batteries are installed.
If batteries are to be strapped down, use the oblong holes at the ends of the shelves to go between
the top side and the bottom side of the shelf. The straps, (not supplied) need to be fed under the
bottom shelf prior to installing batteries.
#6 x 3/8” Stainless Steel
Flat head sheet metal screw
