Model T10 & T30 Series
Page 7
midlandusa.com
POWER ON/OFF AND VOLUME
Press the
POWER/MENU
button for at least 3 seconds to turn the
radio on/off. During Power On, the radio will beep 2 times with
different tones, the LCD will display several icons for 1 second and
then the LCD display will indicate the last channel selected.
To increase/decrease the volume level, press the
\
buttons
during
RX
or
STANDBY
mode
RESTORING YOUR RADIO TO THE ORIGINAL SETTING
To reset your radio to the original (default) setting, turn on the radio
while pressing and holding the
button. The LCD display will reset
to standby mode on channel 1 with no Privacy Code.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel and/or Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your
mouth.
2. Press and hold the
PTT
button and speak in a normal voice into
the
microphone
. The
TX
icon will appear continuously on the
LCD display while transmitting.
3. To receive a call, release the
PTT
button. The
RX
icon will appear
on the display when your radio is receiving a transmission.
ABOUT RANGE
Your radios are designed to give you maximum range under optimum
conditions.
OPERATING YOUR RADIO
Summary of Contents for X-Talker T10
Page 1: ......
