http://www.midlandradio.com
8
To Program a Single S.A.M.E. County Code
on your Weather
Receiver:
•
Display “SINGLE” as explained in 1-4 above, then press “SELECT.”
“S.A.M.E. 01” will be displayed.
(Note if you are programming a
single S.A.M.E. County Code, only the “01” setting will be used.)
•
Press “Select”. Using the “UP” arrow, find the first digit of your
S.A.M.E. County Code. Press “RIGHT” arrow to save the digit and
automatically advance to the next digit.
•
Program all digits of your S.A.M.E. County Code in the same way.
•
Press “SELECT” to store your S.A.M.E. County Code. Press
“MENU” to close the programming menu.
To Program Multiple S.A.M.E. County codes
on your Weather
Receiver:
Select “MULTIPLE” to enter more than one S.A.M.E. County Code.
•
Display “MULTIPLE” as explained in 1-4 above, then press
“SELECT.” “S.A.M.E. 01” will be displayed, indicating you will be
programming your first S.A.M.E. County Code at Weather Receiver
menu location “01.”
•
After programming your first S.A.M.E. County Code, press
“SELECT” then the “UP” arrow to advance to “S.A.M.E. 02.”
Program all of your S.A.M.E. County Codes in the same way.
Reviewing the S.A.M.E. County Codes
that you have programmed
:
To review the S.A.M.E. County Codes that you have programmed into
your Weather Receiver, press “MENU” to open the programming menu
and follow the same sequence that you used to program them.
(See
the section in this manual “Programming Your S.A.M.E. County
Codes.)
PROGRAMMING ALERT TYPE (DISPLAY, VOICE, OR TONE).
1.
Turn off Weather Receiver for silent programming.
2.
Press “MENU” button to open menu options.
3.
Press “UP” arrow to scroll through menu options until “ALT TYPE”
(Alert Type) is displayed, then press “SELECT” button.
4.
Press “UP” arrow to scroll through the following (3) alert types:
“DISPLAY”, “VOICE”, or “TONE”.
Summary of Contents for WR-100
Page 1: ......
