Midland SPD-6, Operation, Parts & Service Manual

Page: 24 / 300

www.roadwidener.com 24
Model SPD-6
5. o
perAtIon
5.1 o
perAtIonAl
s
Afety
All personnel involved in the operation or maintenance
of the machine must read these precautions and
understand all warning labels.
^
Keep bystanders away from equipment while in
use. No riders are allow on machine.
^
Always wear face or eye protection, ear protection,
safety shoes, and other protective equipment
appropriate for the job.
^
Do not operate, work on or around this machine
while under the influence of alcohol, drugs or if
feeling ill.
^
Keep clear of moving machinery at all times.
^
Switch engine off and set parking brake before
exiting operator station.
^
Return travel speed controller to neutral and
use foot brake for normal stopping. Applying
emergency brake will lock up the wheels and
machine will come to an abrupt stop.
^
You must inspect, maintain and service equipment
regularly for safe and reliable operation.
^
Operate equipment safely. Read and understand
this manual before operating machine.
^
It is your responsibility to operate this machine
safely. You must be familiar with machine and all
safety practices before use.
^
Do not allow untrained or unqualified people to
operate machine.
^
Do not jump on or off machine. Never step on
or off machine’s ladder while machine is moving.
^
Wear close fitting clothing and safety equipment
that is appropriate to the job. Do not wear music
or radio headphones while operating equipment.
5.2 s
tArtup
p
roCedure
^
WARNING
Carbon monoxide hazard.
Do not operate engine with machine in an
enclosed building or confined area.
Avoid actions or areas that expose you and
others to carbon monoxide
^
WARNING
Prevent serious injury or death.
Before performing adjustments,
inspections, service or maintenance:
•
Park machine on firm, level surface and
engage parking brake.
•
Switch engine off.
•
Close and lock control panel cover.
•
Chock tires.
•
Place “Do Not Operate” tag on
operators console.
Check the following items before operating machine:
•
Check all fluid levels. Add fluids if low.
•
Check conveyor belt for damage or missing parts.
•
Check belt scraper adjustment. Adjust if needed.
•
Check side board rubber wear. Replace if worn.
•
Check engine fuel filter. Drain water or debris.
•
Check air filter restriction gauge.
•
Inflate tires to rated pressure.
•
Tighten front wheel lugs to 220 lb/ft of torque.
Tighten rear wheel lugs to 450 lb/ft of torque.
•
Inspect tires for signs of wear or damage.
•
Check hydraulic components for proper operation.
•
Visually inspect belts, fan, alternator and battery.
•
Inspect hydraulic hoses for signs of wear or
damage.
•
Verify all guards, covers, shields and access doors
are installed and properly latched.
•
Check for oil and coolant leaks.
Refer to engine manufacturers’ manual provided for