15
ENGLISH
Triple Watch
This function allows the monitoring of three channels at the same time: channel 16, channel in use
and one channel of your choice.
Procedure:
Press
•
T/W
, until
“TRIPLE WATCH”
blinks on the display;
Select the secondo channel you want to monitor; CH16 is automatically monitored;
•
Confirm by pushing
•
T/W
again; the scanning of the 3 channels will begin.
To stop it, press
T/W
and the radio will automatically return to the second channel selected.
If you push
PTT
the scanning will stop and the radio will go to channel
16
.
The Dual Watch and Triple Watch stop when a signal is picked up, giving you the possibility to
answer.
These functions cannot operate properly if the squelch is not adjusted.
6.3 MEM function
This function allows you to store some channels to scan through the Mem Scan function.
To store a channel, follow these steps:
Select the channel to store: keep pressed the
•
MEM
button till the display shows
mem
.
Repeat the same procedure to store other channels.
•
To delete a pre-selected channel in memory:
Select it and keep pressed
•
MEM
button till
mem
disappears from the display.
The other stored channels can be easily monitored through the MEM SCAN function.
The MEM SCAN function cannot properly work if the squelch is not correctly adjusted.
