7
NOTE: If you transmit during “auto-scan” and the “auto-scan” has not found and active channel, it will
transmit on the last selected channel.
Your MXT575 has a
scanning receiver
function
for 136-174MHz.
To Enter and Exit Scan:
1. Press and release the WX button to
scanning
mode.
2. The radio will then scan through channels and stop when it finds a broadcast in your
area.
3. Use the CHANNEL buttons on the microphone to force the radio to re-scan the
channels
while the radio is in scan mode
Pressing the SCAN button takes the radio out of scanning mode, locking in the active
channel. Press and release the SCAN button to reactivate scan.
4. Press the PTT to exit
scan
Mode.
To Manually Set the Channel:
1. With the Scan activated, press the SCAN button to exit scanning mode
The flashing scan icon will extinguish.
2. Using the CHANNEL buttons on the microphone, manually set the active
the
channel.
MENU FUNCTIONS
Menu functions let you configure several operational parameters of the MXT575 to suit your personal
preferences.