Olympian
™
Mobile User’s Guide
©
2005, Midland Radio Corporation
21
Latched Normal Monitor
Press and release this button to disable 2-tone, DTMF (option),
CTCSS and DCS signaling. Once activated, the latched normal
monitor remains active until this button is pressed again. This
mode must be turned off before scan may be started.
While scan is paused on a channel, press this button to
temporarily remove the pause channel from the scan list.
Panel Display
Press and release this button to turn off the LCD. Press again to
turn the display back on.
Public Address
Press and release this button to activate public address mode.
Press again to return to normal radio operation.
Scan
Press and release this button to activate scan. Press again to
turn scan off.
Press and hold this button for two seconds to enter channel scan
edit mode.
Scan Escape
Press and release this button to temporarily suspend scan for
communication on the last received channel. Press the
Scan
Escape
button again to resume scanning. This function allows
you stop scan and communicate on the last received channel, in
case you were unable to immediately respond to the call, without
affecting your priority channel set-up.
Scan Skip
While scan is paused on a channel, press this button to
temporarily delete the pause channel from the scan list. While
scan is off, press this button to remove the selected channel
from the scan list or add it back if it was previously deleted. The
programmed and edited scan list will be restored when the radio
is turned off.
