background image

16

WARRANTY

Congratulations on your purchase of a quality                        Mobile Communication Product! 

You’re joining thousands of satisfied customers who enjoy & experience the benefits of the 

products we distribute. In the unlikely event that some technical difficulty arises with your 

purchase, be assured that we are most anxious to see that the problem is quickly rectified to 

your satisfaction. Please familiarise yourself with the following simple conditions of our warranty. 

        

This warranty covers faults through component failure or failure of the product to operate in 

accordance with published specifications. Product failure as a result of unreasonable 

environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle 

electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and 

installation costs, if any, would be paid by the owner as well as any freight or postage costs of 

transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss 

of use of this product or any form of consequential loss.

CONSUMER WARRANTY

This 

radio

 is warranted by AudioXtra International Pty Ltd to be free from defects in 

materials and workmanship under 

NORMAL USE

 for a period of 

TWENTY FOUR MONTHS

from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE:

Please return the unit for replacement to our 

National Service Centre or the Retailer from where you made the purchase. All accessories 

must be included. Proof of purchase date 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced 

if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

must

accompany the products.

AFTER 30 DAYS OF PURCHASE DATE:

Warranty repair and service is carried out by our 

National Service Centre. Repair and service will be carried out at no cost to the owner if proof 

of ownership and the date of purchase can be verified to the satisfaction of the authorised 

centre concerned with this repair. This proof should take the form of either:

a) The warranty card accompanying this product, stamped and dated by the dealer.

b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model

     number and serial number.

COMMERCIAL WARRANTY:

A product used in or associated with a commercial

application will carry a limited 

SIX MONTH

 warranty. An abnormal commercial application is 

one where usage, dust, vibration, heat/cold and other environmental conditions exist at an 

extreme level.

Model Number:

Serial Number:

Dealer Name:

Date of Purchase:      /      /

Dealer Address:

Purchaser’s Name: 

Invoice/Sales Docket no:

Purchaser’s Address: 

National Service Centre:

10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia

Telephone: (02) 8841 9000   Fax: (02) 9636 1204   email: [email protected]

Please complete details below in the event of warranty service being required.

General Hints: To expedite service and prompt return of the equipment, please:

a) Clearly describe the fault in detail

 c) Include your return address

b) Safety and security pack the unit for transport      d) Provide proof of purchase date as outlined above

www.audioxtra.com.au 
www.midland

The 

battery and accessories

 are warranted for     

TWELVE MONTHS

ML801

Summary of Contents for ML801

















Reviews: