Page 6
midlandusa.com
Model MXR10
CONNECTING REPEATER CABLES
Refer to the Port Connections Diagram for connector locations.
1. Connect the cable from the antenna to the SO239 ANT port.
2. Connect the AC adapter or DC adapter to the 4 pin POWER port.
3. Connect the AC adapter to the 120 VAC receptacle (outlet).
Or
4. Connect the DC adapter to the 12 VDC power source.
5. The MXR10 will turn on when power is applied.
6. An optional speaker microphone may be connected to the 9 pin
MIC port.
7. The programming cable is connected to the 4 pin POWER port
when used.
Note: The speaker microphone should be disconnected while the radio
is being programmed.
