ALERT TYPE
Press MENU
Press UP or DOWN arrow until ALERT TYPE is displayed. Press SELECT.
Press UP arrow to select VOICE, TONE or DISPLAY.
TONE - Alert tones will sound for five minutes or until you press any
button to stop the tones. If you press the WEATHER/SNOOZE button, you
will hear the voice of the weather broadcast.
VOICE - Alert tones will sound for about eight seconds, then you will hear
the voice of the weather broadcast for about five minutes. If you want to
listen longer, press the WEATHER/SNOOZE button.
DISPLAY - Message scrolls across display. No alert sounds will be heard.
Press SELECT to set alert type.
SAME SET
Press UP or DOWN arrow until SAME SET is displayed.
Press SELECT -
Press UP arrow to select SINGLE, MULTIPLE or ANY. SINGLE is for 1
county only, MULTIPLE is for more than 1 county and ANY is for all
counties. Note: Your radio comes preprogrammed to receive weather and
hazard alert transmissions for all S.A.M.E county codes within range. If
this is what you want, set the radio to ANY by pressing SELECT again. If
not, read further.
Press SELECT when you see MULTIPLE. SAME 01 is displayed.
Press SELECT "-- -- -- -- -- --" is displayed. The first "--" is flashing.
Press UP arrow to select first digit. (Print out NEWS 25's list of county
SAME codes and frequencies at news25.us.)
Press RIGHT arrow to move to next digit.
Press UP arrow to select next digit.
Repeat for all 6 digits.
Press SELECT when all 6 digits are entered. SAME SET is displayed and
you're finished if you selected SINGLE. If you selected MULTIPLE, you
are ready to enter the next county. Press the UP arrow to set display to
SAME 02 to set the next county code. Repeat this step for each
additional county (up to 9) you would like to program in your radio.
SET CHANNEL/VOLUME
Press UP or DOWN arrow until CHANNEL is displayed.
Press SELECT - Radio comes on so you can hear the broadcasts.
