Model BR180
midlandusa.com
Page 16
RADIO TO RADIO CLONING
The settings from a BR180 radio can be directly transferred to another BR180 radio,
bypassing the need to individually program radios. The BA22 cloning cable is required and
is listed in the back of this manual and available on the
www.midlandusa.com
website.
1. Turn off both radios.
2. Connect the programmed (Host) radio to the radio to be programmed (Clone) using
the BA22 Cloning cable.
3. Turn on the Host radio.
4. Press and hold both the
Up
and
Down
arrow buttons and turn on the radio to
be Cloned.
a. “PROGRAM” will flash in the display to confirm you are in Cloning mode.
b. The display will count upwards to 100 to show the data transfer.
c. The Cloned radio will restart after cloning is complete.
5. Unplug the radios and check the radios’ operation as the final conformation.
FULL FACTORY RESET
You can reset the radio to its original factory (default) settings by pressing and holding
down the
TALK
and
UP Channel/Menu
arrow buttons while turning the radio on.
FREQUENCIES
The radio comes pre-programmed with the most commonly used Frequencies and Privacy
Codes already assigned to a channel.
DEFAULT FREQUENCIES AND PRIVACY CODE CHART
You may change the channel assignment using the FREE Programming Software or the
Keypad Programming as shown above.
CH
NO.
Frequency
(MHz)
Frequency
Code
Number
Privacy
Code
Privacy
Code
Number
1
464.5500
55
67.0
1
2
467.9250
85
67.0
1
3
467.8500
79
67.0
1
4
467.8750
81
67.0
1
