d. RX/TX:TX=transmit mode; RX=receive mode
e. SCAN function actived
f. EMG function actived
g. LOW function actived
h. "P": Save function actived
i. Lock: keyboard lock function actived
5.EMG button:
emergency channel. By pressing it, the unit automatically skips to
Channel 9 (emergency channel). The display will shows "EMG". It will not be
possibile to change accidentally the channel.
6.''SCAN'' button:
with this control, you can automatically seek for a busy channel.
Turn the Squelch clockwise until the background noise is no longer heard.
Press the ''SCAN'' button: the transceiver will scan automatically all the channels
until a carrier is being received.
7."H/L" button:
it selects the output power level during trasmission.When the unit is
turned on, it always transmits with high power (4W). By pressing this button, the unit
will transmit with low power (1W ). The display will shows "LOW". Press again the
H/L button to return to "HIGH" power level.
8."FM'' button :
to select FM mode (not in use)
9. Save button:
it activates the save function of the unit for energy saving task.(the
display will shows"P")
10. "Q.UP - Q.DOWN" buttons
: to skip 10 channels up (Q.UP) or 10 channels down
(Q.DOWN). Keeping this button pressed, the "autorepeat" function is obtained.
11."LIGHT button:
display lighting (temporized).This function allows to operate in
darkness conditions.
12."Channels UP" button:
to skip to the next channel. Keeping this button pressed,
the "autorepeat" function is obtained.
13. "Channel DOWN":
to skip to the previous channel. Keeping this button pressed,
the "autorepeat" function is obtained.
14."LOCK"
button:it allows you to lock the keyboard, thus avoiding accidental use of
the keys.
15. Loudspeaker
16. Microphone:
during transmission, keep your mouth 4 cm far from the unit, and
speak with a normal tone of voice to the microphone.
17."SP." jack:
external loudspeaker jack(the internal loudspeaker is excluded).
18."PTT/MIC" jack:
PTT jack / external microphone jack
19."13.8V DC CHARGE":
power supply/charge jack.You can charge the unit from
external sources: car battery, boat battery etc.)
20.Push to talk button ("PTT"):
By pressing it, the transmitter is activated. When
released it, the receiver is activated.
21.Battery compartment
:insert 9 Nicd alcaline batteries
22. Belt clip
How to operate with your transceiver
1. Insert the antenna in the antenna connector.
2. Insert 9 alcaline batteries into the battery compartment, noting polarity (the
alcaline batteries are not rechargeable)
