9
2.
Press and release the
”UP”
or
“DOWN”
channel button to activate scan. The
radio will begin to scan for
OPEN
channels.
Scanning will stop on the first available open channel for about 5 seconds then
move to the next channel.
3.
Press the
“PTT”
button to stop scanning and talk on that channel.
4.
To reactivate scan repeat steps above.
When you enter the program mode with the
“F”
button the radio will go back
to operate mode after about 8 seconds if no buttons are pressed.
ACTIVATING DUAL WATCH
Dual watch is a function that allows you to scan only two channels
1.
Select channel one.
2.
Press the
“F”
button repeatedly (usually 6 times) until
“DW”
is flashing in the top
of the display.
3.
Select the second channel to be scanned.
About 3 seconds after your selection of the second channel is complete the
radio will begin switching between the two channels.
When the radio hears activity on either channel, scanning will stop on that
channel for about 5 seconds and then resume scanning.
If communication is desired on the channel scanning stopped on, press the
“PTT”
button. This will deactivate Dual Watch and allow you to communicate
normally.
4.
To reactivate Dual Watch repeat steps above.
Summary of Contents for 75-517
Page 1: ......
