background image

71-506-10D FULL-DUPLEX MOBILE 

 

8

 

 

 

 

     

6. SPECIFICATIONS 
 

6.1  General 

Frequency Range  

     Version SA   

300 - 335MHz 

                         Version A   

335 - 370MHz  

                         Version B    

365 - 400MHz 

                         Version C    

400 - 435MHz 

                         Version DS   

420 - 455MHz 

                         Version D     

440 - 475MHz 

                         Version E     

465 - 500MHz 

                         Version F    

485 - 520MHz 

    
   Number of Channels        

64 channels  (observe duplexer limitations) 

   Channel Spacing            

12.5/20/25/30KHz 

   Operation Mode             

Semi Duplex/Full Duplex  

   Antenna Impedance        

50 ohm unbalanced 

   Power Supply                

DC 13.6V negative ground only  (external) 

   Consumption                 

8 amperes or less 

   Environmental Conditions      -30 to +60 degree C, 95% humidity @35C 
   Dimensions                  

220 (w)  82 (h)  347 (d) mm 

   Weight                    

 

6 kgs. 

 

6.2   Transmitter 

   Output Power                 

10W continuous, 13W maximum 

   Switchable Bandwidth        

Full sub-band 

   Frequency Deviation         

5KHz(wide band)  2.5KHz(narrow band) 

   Frequency Stability          

+/- 1KHz  

   Frequency Response       

1, -3dB,  300-3000Hz @1KHz ref. 

   Signal to Noise Ratio       

50dB or more @1KHz 70% mod. (45dB at narrow) 

   Modulation Distortion       

3% or less 

   Spurious & Harmonics      

0.25uW or less 

 

6.3 Receiver 

   Switchable Bandwidth        

full sub-band  

   IF Frequencies               

1

st

 IF 73.35MHz, 2

nd

 IF 455KHz 

         Frequency Stability         

+/- 1KHz 

   Sensitivity                     

0.4uV or less for 20dB N.Q. / 0.3uV for 12dB SINAD 

   Squelch Sensitivity          

0.25uV or less 

   Selectivity                     

70dB or more at 25KHz 

   Blocking                   

 

90dB or more 

   Intermodulation              

70dB or more 

   Spurious Response          

70dB or more 

   AF Response                 

1, -3dB, 300-3000Hz @1KHz ref. 

   AF Distortion                  

5% or less @1KHz 70% mod 

   Signal to Noise Ratio         

50dB or more @1KHz 70% mod. (45dB at narrow) 

 

Summary of Contents for 71-506-10D









Reviews: